Re: ITP 2600: SS7 Signalling Link to dest will not align
I think your problem is due to the host not being up at the time.
The way the system works is this The host comes up and opens the ethernet socket to the SS7 system. This then causes the SS7 system to open the socket to the VCO. If the host drops the socket to the SS7, then the SS7 likewise drops the socket to the VCO.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...