Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Lab Set-up

Hi!

I have to setup a Voip lab and I have never see anything about that.

Follows the equipments I have got with me, anyway on the cisco.com I didn't find anything simple and useful for me to setup a lab (just two telephone and two routers back2back connected...).

Does anybody have some links or idea or simple configuration just to set up a simple lab ?

Tks in advance

1) 1x CISCO1760-V-CCME

Cisco 1760-V with 24-user CCME Feature License,32Flash/128DRam

VIC-2BRI-NT/TE Two-port Voice Interface Card – BRI (NT and TE)

WIC-1T 1-Port Serial WAN Interface Card

Cisco 1700 IOS IP/VOX PLUS

FL-CCME-SMALL Cisco Call Manager Express Feat License For Up To 24 Users

Cisco 1700 MEM1700-64U128D

Cisco 1700 64MB to 128MB DRAM Factory Upgrade

PVDM-256K-4 4-Channel Packet Voice/Fax DSP Module

SW-ITS-3.0.0 IOS Telephony Services 3.0 Phantom

2) 1x CISCO2651XM

High Performance Dual 10/100 Modular Rout with Cisco IOS IP

Cisco 2600 Ser IOS IP PLUS

NM-HD-2V Two-slot IP Communications Voice/Fax Network Module

VIC2-2BRI-NT/TE Two-port Voice Interface Card – BRI (NT and TE)

WIC-1T 1-Port Serial WAN Interface Card

FL-CCME-MEDIUM Cisco Call Manager Express Feat License For Up To 48 Users

MEM2600-64U128D 64 to 128MB DRAM factory upgrade -265xXM/XM VPN Bundles

MEM2600-16U32FS 16 to 32 MB Flash Factory Upgrade for the Cisco 2600XM

SW-ITS-3.0.0 IOS Telephony Services 3.0 Phantom

3) 1x Telefono IP - 7960G

4) 1x Telefono IP - 7912G

1 REPLY
Cisco Employee

Re: Lab Set-up

HI

What are you building this lab for?

You can do PPP Muultilink Qos over the WAn link along with connecting the BRI ports together and making a lot of calls that go around using up BRI ports and also the WAN link if you so wish.

What is the point of the LAB setup? Once you get that stright then we can maybe help more.

Colin

167
Views
0
Helpful
1
Replies
CreatePlease login to create content