please configure "voice translation-rule 1" and not "translation-rule 1" as these are different things.
Then when checking, please enable "debug ccsip message" and "term mon", in case of problems you can post the output here.
Note the reason I made an example with a more complicated destination-pattern than just 1 followed by 10 dots, it's because it enforces the NANP and prevents user misdialing. That is always a good thing in telephony.
Also note your DP 222 for inbound seems too relaxed in accepting everything and just sending out.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...