I have a MC3810 with 12.3.18 which gives me access to the sip-ua command. Can I have this register with a sip proxy/itsp? I have seen references to commands available in the sip-ua context for authentication information ...etc however I do not have this available. Thoughts?
do you have "authentication" as a command under "dial-peer voice xx pots" ? These are the credentials to register the number used as "destination-pattern" to the proxy configured as "registrar" under "sip-ua".
I will check on this and let you know but my first thought is no. I do know that I do not have a "registrar" under sip-ua . I do have a sip-server where I can specify an IP address but nothing that looks like authentication information. I will try and post a menu list.
So let me make sure I am understanding. You are saying that I do not have a sip authentication feature on this IOS release which is best I can run on this router. However I should still be able to register with a sip proxy / location agent (ie Asterisk) so my fxs ports show up can be reach ed by that proxy?
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...