I am running MeetingPlace Express and every so often I run into issues where if someone calls the number, it connects, but I hear no audio. I am wondering if this is a limitation of MeetingPlace or an issue with the number of concurrent calls?
We have several numbers pointing to and internal extension which is a router pattern that points directly to the meetingplace h.323 gateway.
It is strange at times, when I dial the internal extension, I get connected, but hear no prompts. Immediately afterI dial an external number that points to the same internal extension, and can get fully connected. Could this also be a QoS issue? I have checked the status reports for capacity, and I am only running about 20% of licesnes during this time as well.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...