Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

No CLI Access to Call Manager MCS 7800

Hello, my client has a Call Manager server MCS 7800.  We have access to the GUI, but the former IT Manager's network docu

mentation has an incorrect password for telnet access.  How can we go about recovering or resetting this password?

thanks for any help in advance.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: No CLI Access to Call Manager MCS 7800

Bad news:

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucmbe/rel_notes/6_1_2/cucmbe-rel_note-612_2.html#wp339319

Cisco Unified Communications Manager Does Not Support Recovery of Administration or Security Passwords

Cisco Unified Communications Manager does not support recovery of administration or security passwords. If you lose these passwords, you must reset the passwords, as described in the Cisco Unified Communications Operating System Administration Guide.

The Cisco Unified Communications Operating System Administration Guide calls the section, "Recovering the Administrator or Security Passwords," instead of "Resetting the Administrator or Security Passwords." Access the "Recovering the Administrator or Security Passwords" section to reset the passwords.

Find your version here and follow the docs.

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_documentation_roadmaps_list.html

For 7.1.2, that would be here:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cucos/7_1_2/cucos/iptpch2.html#wp1044244

Hope this helps....

1 REPLY
Cisco Employee

Re: No CLI Access to Call Manager MCS 7800

Bad news:

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucmbe/rel_notes/6_1_2/cucmbe-rel_note-612_2.html#wp339319

Cisco Unified Communications Manager Does Not Support Recovery of Administration or Security Passwords

Cisco Unified Communications Manager does not support recovery of administration or security passwords. If you lose these passwords, you must reset the passwords, as described in the Cisco Unified Communications Operating System Administration Guide.

The Cisco Unified Communications Operating System Administration Guide calls the section, "Recovering the Administrator or Security Passwords," instead of "Resetting the Administrator or Security Passwords." Access the "Recovering the Administrator or Security Passwords" section to reset the passwords.

Find your version here and follow the docs.

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_documentation_roadmaps_list.html

For 7.1.2, that would be here:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cucos/7_1_2/cucos/iptpch2.html#wp1044244

Hope this helps....

2446
Views
0
Helpful
1
Replies
CreatePlease to create content