I have a central site and a remote site and when a user logs in at the remote site with their profile from the central site they are unable to make out going calls just get a fast busy. However,a miss call appears on the destination phone eg. if i call my mobile from the phone at the remote site which is logged in with a profile from the central site, i hear a busy tone on the phone and get a missed call on my mobile. All other users at the remote site are able to make outgoing calls fine and if the same user logs in with the same profile back at the central site then outgoing calls works fine.
I have checked CSS/Partitions etc just not making sense...
Re: No outgoing Calls when Extension Mobility used.
This issue is most likely caused by the logged-in users at the remote site are not using the calling search space for the remote site. A valid CSS needs to be set on either the device, or on the line appearance on the extension mobility profile.
If feasible, set the CSS on the phones at the remote site...and leave CSS blank on the line appearances...this will allow any outbound calls to access local TDM circuits regardless of who is logged into the phone.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...