i am using TCL IVR 2.0 and IPIPgw. In the script i just try to ask the user to enter the destination number and then place calls to that number. but i am getting the following status for digit collection cd_010. i searched on cisco site and found this description for the code.
"The digit collection was terminated because of an unsupported or unknown feature or event."
i searched the net and i didnt find a workaround for it. i have attached the tcl script.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...