Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Odd matched dial-peer on incoming call

Hi guys,

I really don't understand what's going on. Maybe I'm wrong, maybe not. But.

I got a call on my voice-port 0/2/0. But my cisco matches the wrong dial-peer. This dial-peer matches by trunk group "common" which has port 0/0/1-0/0/3 (0/2/0 is not a member of the trunk group). Is it bug or feature?

cnx-rr01#sh voice call st

CallID     CID  ccVdb      Port        Slot/DSP:Ch  Called #   Codec    MLPP Dial-peers

0xAD       152D 0x4AD5FF38 0/2/0            0/1:1   4255550103 g711ulaw 102/501

1 active call found

cnx-rr01#sh voice port s | i fxo

0/0/0           --  fxo-ls      up    dorm idle     on-hook  y

0/0/1           --  fxo-ls      up    dorm idle     on-hook  y

0/0/2           --  fxo-ls      up    dorm idle     on-hook  y

0/0/3           --  fxo-ls      down  down idle     on-hook  y

0/2/0           --  fxo-ls      up    up   idle     off-hook y

0/2/1           --  fxo-ls      up    dorm idle     on-hook  y

0/2/2           --  fxo-ls      up    dorm idle     on-hook  y

0/2/3           --  fxo-ls      down  down idle     on-hook  y

cnx-rr01#sh run | sec dial-peer voice 102

dial-peer voice 102 pots

trunkgroup common

tone ringback alert-no-PI

description ToPSTN

translation-profile incoming IN

translation-profile outgoing OUT00

preference 10

destination-pattern 9T

forward-digits all

cnx-rr01#sh trunk group common

Trunk group: common

        Description:

        trunk group label: common

        Translation profile (Incoming):

        Translation profile (Outgoing):

        LPCOR (Incoming):

        LPCOR (Outgoing):

        Preemption is disabled (by default)

        Hunt Scheme is round-robin

        Max Calls (Incoming):   NOT-SET (Any)   4 (Voice)       NOT-SET (Data)

        Max Calls (Outgoing):   NOT-SET (Any)   4 (Voice)       NOT-SET (Data)

        Max Calls (MixTotal):   NOT-SET (Any)   4 (Voice)       NOT-SET (Data)

        Retries: 0

        Trunk 0/0/1     Preference DEFAULT

                Member Timeslots : 1

                Total channels available : 1

                Data = 0, Voice = 0, Modem = 0, Pending = 0, Free = 1

        Trunk 0/0/2     Preference DEFAULT

                Member Timeslots : 1

                Total channels available : 1

                Data = 0, Voice = 0, Modem = 0, Pending = 0, Free = 1

        Trunk 0/0/3     Preference DEFAULT

                Member Timeslots : 1

                Total channels available : 0

                Data = 0, Voice = 0, Modem = 0, Pending = 0, Free = 0

        Total calls for trunk group: Data = 0, Voice = 0, Modem = 0

                                     Pend = 0, Free = 2

        advertise_flag 0x00000040, capacity timer 25 sec tripl_config_mask 0x00000000

        AC_curr 2, FD_curr 0, SD_curr 0

        succ_curr 19 tot_curr 19

        succ_report 19 tot_report 19

        changed 1 replacement position 0

        Current trunk : 0/0/1

Everyone's tags (1)
3 REPLIES
New Member

Re: Odd matched dial-peer on incoming call

Can you post the voice-port configuration?

Sent from Cisco Technical Support iPhone App

New Member

Odd matched dial-peer on incoming call

Hi Russel,

Sure:

cnx-rr01#sh run | sec voice-port 0/2/0

voice-port 0/2/0

supervisory custom-cptone CN-BELLCORE

cptone CN

timeouts call-disconnect 1

timeouts wait-release 1

connection plar opx 914255550103

description +86 400 XXXXXXX - Support IVR

station-id name China Support

station-id number +86XXXXXXXXXX

caller-id enable

New Member

Odd matched dial-peer on incoming call

Guys, do you have any thoughts by the chance?

1049
Views
0
Helpful
3
Replies