I'm having issues between two sites that are connected to eachother using Cisco's 887 VA. The phone system is a NEC SV8100 and it connects to several DT700s. The VPN seems to work perfectly fine because I can ping every device from one site to another and also the other way arround. However I'm getting one way RTP flows.
Site A -> 192.168.1.0/24 Site B -> 192.168.2.0/24
In site A the NEC SV8100 needs NAT so it can be acessible by the SIP trunks.
The problem is that no matter if the call is initiated by Site A or B, Site B does not ear Site A.
I am wondering if I got something wrong on my configuration on any of the Cisco's??? Can you guys see something wrong on the config?
1. Introduction Internet security is important with the increasing
attacks that are happening every day. Many internet and browsing
security solutions exist, but some are not very easy to use or maybe the
question is how can I enable them? In this referen...
Cisco Software Manager Server API Guide This document describes the
programmatic interfaces, RESTful APIs, which are supported by Cisco
Software Manager Server (CSM Server). Overview CSM Server supports a set
of finite RESTful APIs. The first step to use ...
If you are using Cisco's new linux-based Cisco Software Manager server,
then you probably want to make sure there is a startup service for
it.I'll assume that you've already installed the CSM server on a
systemd-based linux system. The commands given belo...