Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Outbound caller id on T1 CAS

I have a T1 CAS, used for outbound voice long distance calls on a 2811 cisco router. Is it possible to broadcast one main phone number for any outbound calls?

  • Voice over IP
3 REPLIES

Yes  , use voice translation

Yes  , use voice translation rule on the router and apply it to calling number on outbound dial-peer.

Here is a link...

http://www.cisco.com/c/en/us/support/docs/voice/call-routing-dial-plans/61083-voice-transla-rules.html

 

Thanks

Manish

 

New Member

Tried but no luck. Most

Tried but no luck. Most likely the telecom company is blocking it.

If you have correctly

If you have correctly configured calling number translation and applied it to right dial-peer and in "debug isdn q931" logs you can see correct calling number (as desired) but can’t see on remote user phone then it’s a provider issue , you need to talk with them.

 

Rate all helpful post

Thanks

Manish

159
Views
0
Helpful
3
Replies
This widget could not be displayed.