Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

PGW (LOGGER - cant open XECfgParm.dat)

I discovered this error on my PGW once I tried to login.Please any clue on how to resolve it?

pgw1% mml

Copyright ? 1998-2002, Cisco Systems, Inc.

LOGGER - cant open XECfgParm.dat

pgw1%

1 REPLY
Cisco Employee

Re: PGW (LOGGER - cant open XECfgParm.dat)

LOGGER is normally used to log all the MML commands on the active PGW in the /opt/CIscoMGC/var/log/mml.log file

First I would check this directory to make sure it is not full.

Next I would run the following at the unix prompt:

df -k

Make sure you are not above 80%

Finally, have a look at your XECfgParm.dat file

Again at the unix propmt:

1. cd /opt/CIscoMGC/etc

2. ls -al

Look at the ownership and permissions of your XECfgParm.dat file. Check the date and make sure that they have not changed.

Here is an example in a newly installed PGW

pgw-2% ls -al XECfgP*

-rw-rw-r-- 1 mgcusr mgcgrp 22168 Aug 23 16:21 XECfgParm.dat

pgw-2%

Hope this helps

238
Views
0
Helpful
1
Replies
CreatePlease to create content