I have a PGW connected to a PSTN (Siemens EWSD) for a prepaid calling card platform. I can dial into the cisco platform but when I route the call back to the same PSTN, the PSTN sees the calling number prepended with 009.
Below is the SS7 trace from the PSTN showing the owner DN 00915925 instead of 15925 (Although I noticed in the trace the NAI is international while the PSTN is expecting national).
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...