I have a dual integration with CCM 5.1 and a Digital PIMG to a Avaya G3, Unity is ver 4.2(1). The problem I am getting is that using the port monitor is see the call coming from the PBX, it gets answered but Unity does not play an Opening Greeting. I have even tried creating a seperate Opening Greeting for the PBX making sure in the profile that it is using PIMG switch.
Is the nec rejecting the call and sending it back to the originator? If this is the case, the call coming back into the unity has no DNIS info so it would go to the opening greeting. Try placing an access code.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...