Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

PIX and softphone on the outside using SIP

Hi,

I have a SIP softphone talking to an IP PBX through a PIX.

I can register with the PBX with the extension, but I have no voice either way.

I have;

no fixup protocol sip udp 5060

no fixup protocol sip 5060

Otherwise, I cannot register with the PBX.

I have static (inside,outside) interface <inside IP> netmask 255.255.255.255 0 0

access-list inbound permit udp any any eq 5060

access-list inbound permit udp any any range 10000-20000

Any ideas?

  • Voice over IP
1 REPLY
Cisco Employee

Re: PIX and softphone on the outside using SIP

Fixup protcol sip should be enabled:

http://cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00801fc74a.shtml

There are several bugs with this, make sure you have the latest version of PIX software.

Hope this helps

120
Views
0
Helpful
1
Replies
This widget could not be displayed.