Buenas...
Acabo de instalar una tarjeta VIC2-4FXO a un router 3925, el problema es que los led de la tarjeta estan prendidos en color ambar y además no puedo configurar los puertos de dicha tarjeta...
Si hago un show inventory me muestra la tarjeta pero cuando intento configurar los puertos no me deja no me los detecta..
Me hace falta algo para poder utilizarla?
Adjunto el sh inventory:
RouterTelefonia#sh inventory
NAME: "CISCO3925-CHASSIS", DESCR: "CISCO3925-CHASSIS"
PID: CISCO3925-CHASSIS , VID: V02, SN: FTX1642A04S
NAME: "Cisco Services Performance Engine 200 for Cisco 3900 ISR on Slot 0", DESCR: "Cisco Services Performance Engine 200 for Cisco 3900 ISR"
PID: C3900-SPE200/K9 , VID: V04 , SN: FOC16400V7B
NAME: "2nd generation four port FXO voice interface daughtercard on Slot 0 SubSlot 0", DESCR: "2nd generation four port FXO voice interface daughtercard"
PID: VIC2-4FXO , VID: V04 , SN: FOC17431094
NAME: "SM-ES3G-16-P: EtherSwitch SM L3 + PoE + 16 10/100/1000 on Slot 2", DESCR: "SM-ES3G-16-P: EtherSwitch SM L3 + PoE + 16 10/100/1000"
PID: SM-ES3G-16-P , VID: V02 , SN: FOC16384D6V
NAME: "C3900 AC-POE Power Supply 2", DESCR: "C3900 AC-POE Power Supply 2"
PID: PWR-3900-POE , VID: V03, SN: SNI1521C71X
thanks