pots-to-pots call

[cisco.s]

Good day,

I have the following scheme:

phone1<-->cisco1751v1<-ISDN_PRI->cisco1751v2<-->phone2

Two routers equipped with vic2-2fxs cards and vwic-1mft-e1 cards connected using PRI cross cable. I want to perform call from phone 1 through ISDN to phone 2. Which dial-peers should I to configure on the routers?

[spremkumar]

hi

first link consists of the reqd config to be done in ur boxes would suggest to chop off the lines related to RSVP which may not be required in ur scenario..

http://www.cisco.com/univercd/cc/td/doc/product/software/ios113ed/113t/113t_1/voip/examples.htm

http://www.cisco.com/en/US/tech/tk652/tk653/tech_configuration_examples_list.html

http://www.cisco.com/en/US/tech/tk1077/tech_configuration_examples_list.html

http://www.cisco.com/univercd/cc/td/doc/product/software/ios113ed/113t/113t_1/voip/config.htm

regds