I have to setup or implement a Prepaid Calling cards solution in a country network.
I will have 90 E1 (side PSTN : signalling could be R2 ) and an Internet provider from the other side ( which will link us to the other countries).
i am looking for a whole cisco solution ( gateway ,billing..), i was not able to find any useful info on the Cisco web site( sample config,...).
Could any one advise me
1-what devices should i use to make my prepaid calling cards solution running and operational( billing + gateways ..) taking into consideration the recommendations mentioned above( 90 E1 R2 signalling)
2- what are the components of a prepaid calling cards solution, if you could provide me with documents ,web links sample config ..to clarify further this issue.
what i am intersting in is my side , the other sides( other countries) are already setup.
This document is an early notification of a behaviour change that will be introduced in IOS XR release 6.5.
IOS XR configuration principles relevant for this article are:
On router platforms all interfaces must be by defaul...
With XR 4.2.0 the ASR9000 is releasing a new line of hardware models. This amongst others is the RSP440, the next generation RSP with faster switch fabric along with Typhoon based Linecards, the next generation network processor.
The Cisco EPN system incorporates a network architecture designed to consolidate multiples services on a single Multiprotocol Label Switching (MPLS) transport network. This network is designed primarily based on Application ...