I would like to know is it possible to create a PSTN simulator for CUCM 8.5. We want to test our calls in the lab enviornment rather than using the real T1/ISDN/PRI's if possible such as testing them with non-DID's rather than DID's. Our plan is to use the MGCP. We have the gateways and T1/ISDN/PRI in case you want us to use it. I have no idea at this time how to start. CUCM's are already up and running in a simulation enviornment.
Please also suggest if there is a better option then MGCP.
IntroductionPre-requisite: Caveat :When IPXE Boot could be done : IPXE Boot :Ipxe boot using DHCP Server :
iPXE boot in ASR9K
Migration recommendation document for Cxr to Exr.
This document applies to NCS5500 and ASR9000 routers and has been verified as such.
traditional ECMP or equal cost multipath loadbalances traffic over a number of available paths towards a destination. When one path fails, the traffic gets r...
Hi community,I just wanted to share my findings about accesing to ACL counters by SNMP on ASR9000/XR.
Searching on Internet I found the section ACL Counters Using SNMP in the IP Addresses and Services Configuration Guide but I didn't found any inf...