We are trying to configure Publisher and Subscriber on CCM 4.1.
Firstly on our Publisher CCM we are not finding our subscriber server while registering in sql manager. If we give IP address then it detects and registers. Next when we are trying to add subscriber in the publisher as it's subscriber it gives error. How do we configure in publisher that this particular CCM is the subscriber and synchronise the databse with that Subscriber-CCM.
Link on Cisco.com , microsoft.com any working example is highly appreciable.
If you change configuration values by directly editing the configuration files, you must stop and restart the SESM application and its Jetty server before the changes take effect. If you deployed SESM in SPE mode, you also must stop and restart RDP
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...