I'm having some issues with configuring qos on a pos oc-12 osm blade. It appears that when using mqc, class maps matching dscp 46, protocol ospf and protocol bgp invoke nbar and software switch all the packets that are match. That being said control traffic can't get any CPU time, do to the software switching. Thoughts??
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...