I am trying to register serveral 7940 Phones with the 3CX phone system. When the phones are on different networks to each other they register and work as expected. However, when the phones are on the same network only one will register. It is not phone or extension specific as different phones register.
The phones are using NAT and will not register without this.
It had been suggested that the action tag should be set to none, this is done but has no effect.
1. Introduction Internet security is important with the increasing
attacks that are happening every day. Many internet and browsing
security solutions exist, but some are not very easy to use or maybe the
question is how can I enable them? In this referen...
Cisco Software Manager Server API Guide This document describes the
programmatic interfaces, RESTful APIs, which are supported by Cisco
Software Manager Server (CSM Server). Overview CSM Server supports a set
of finite RESTful APIs. The first step to use ...
If you are using Cisco's new linux-based Cisco Software Manager server,
then you probably want to make sure there is a startup service for
it.I'll assume that you've already installed the CSM server on a
systemd-based linux system. The commands given belo...