I running Yate and Asterisk/IAX2 in the same box, to get H323 and convert to SIP, but I have a costumer that wants to send H323 with codec g723, but it doesn?t work good at all. So, can have H323 and SIP running on the same box like a c3600 or c2600?
Re: Running H323 and SIP on the same cisco gateway
Do the products you mentioned a nice PBX for 30 users, 1 RU rugged unit without disk, hundreds of well documented features for voice, thousand of features for data integrated in the same box, for approx 1500 USD ?
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...