Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

Sending ANI using wildcard

I am using a cisco AS5300, and we have experiencing a problem sending the ANI. I want it to be a wildcard and on my dial-peer i didn't specify a clid. As far as i am concern the cisco is sending an ANI by default. But there are times that it didn't pass any ANI at all. Does clid network-number command useful? using wildcard.

dial-peer voice 316 voip

description DID Block 01312022xxx

huntstop

destination-pattern 01312022...

progress_ind setup enable 3

session protocol sipv2

session target ipv4:192.168.111.22

dtmf-relay rtp-nte

codec g711ulaw

1 REPLY
Hall of Fame Super Gold

Re: Sending ANI using wildcard

Hi,

yes you can override calling number using 'clid' commands, but what do you mean by wildcard ?

198
Views
0
Helpful
1
Replies
CreatePlease to create content