I have the following problem:
When I try to configurate the interface E1 "VWIC2-2MFT-T1/E1" with this command:
"ds0-group 0 timeslots 1-15,17-31 type e&m-fgb"
router don´t received it.
GW-1(config-controller)# ds0-group 0 timeslots 1-15,17-31 type ?
e&m-delay-dial E & M Delay Dial
e&m-fgd E & M Type II FGD
e&m-immediate-start E & M Immediate Start
e&m-lmr E & M land mobil radio
e&m-melcas-delay MEL CAS (CEPT) E & M Delay Start
e&m-melcas-immed MEL CAS (CEPT) E & M Immediate Start
e&m-melcas-wink MEL CAS (CEPT) E & M Wink Start
e&m-wink-start E & M Wink Start
ext-sig External Signaling
fxo-ground-start FXO Ground Start
fxo-loop-start FXO Loop Start
fxo-melcas MEL CAS (Mercury) FXO
fxs-ground-start FXS Ground Start
fxs-loop-start FXS Loop Start
fxs-melcas MEL CAS (Mercury) FXS
none Null Signalling for External Call Control
r2-analog R2 ITU Q411
r2-digital R2 ITU Q421
r2-pulse R2 ITU Supplement 7
Im using this IOS:
c3845-advipservicesk9-mz.124-24.T1.bin
Which could be problem?
Regards,
Jonathan Perez
