I am using a Cisco 3640 (IOS ver 12.2(21T))as a VoIP Gateway.There was no isues until I only had H323 on the Gateway.Now,I also want SIP as well to run of the same Gateway.Thus,H323 and SIP has to work on the same Gateway at the same Time.The Scenario is this the Origination Calls from the Gateway is H323 and Termination Calls to Gateway is SIP.I find it very difficult.When SIP works ,the Origination Calls fails to work and when H323 Calls work,Termination ( SIP) Calls doesn't work...I need to use the Same Gateway to use both H323/SIP.Pls,Can Someone help me with this any command specific help,useful docs or any Trobleshooting guides etc..I would be greatful.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...