Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
noc
Community Member

SIP call count

Hi All,

I am using AS5400XM now and I'd like to count calls for sip-in and sip-out 24hrs with MRTG.

I can't find any OID yet

5 REPLIES

Re: SIP call count

u mean u wanna limit the number of calls thrugh that sip-trunk ?

Cisco Employee

Re: SIP call count

Are the calls using any T1 interfaces whether CAS or PRI? If yes, these OID's may help:

cpmDS1ActiveDS0s (.1.3.6.1.4.1.9.10.19.1.1.9.1.3)

isdnBearerOperStatus (.1.3.6.1.2.1.10.20.1.2.1.1.2)

callActiveTable (.1.3.6.1.2.1.10.21.1.3.1)

Regards,

Michael.

noc
Community Member

Re: SIP call count

Thanks for your reply.

I know these OID.

But my question is how can I collect sip calls only toward in and outbound.

I'd like to grpah sip calls in 24 hrs using MRTG.

I am monitoring 24 hrs through TDM pri circuits using MRTG.

Cisco Employee

Re: SIP call count

Does the "show call active voice brief' command give you the information you are looking for? If so, see if this information is helpful:

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a008048349c.shtml#topic1

Hope this helps.

Regards,

Michael.

noc
Community Member

Re: SIP call count

Thanks for your information.

But It doesn't match with my need.

When I excute GW#sh call active voice brief ,

I need end of message as below.

Telephony call-legs: 10

SIP call-legs: 12

H323 call-legs: 0

Call agent controlled call-legs: 0

SCCP call-legs: 0

Multicast call-legs: 0

Media call-legs: 0

Total call-legs: 22

I need to collect sip call-legs count every 5 mins .

359
Views
0
Helpful
5
Replies
CreatePlease to create content