Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SIP packet size

Hi,

we have seen that CISCO gateways add "proprietary" SIP heade fields such as:

- Cisco-Guid

- Timestamp

Is there a way to disable them to be written in SIP packets?

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions

Re: SIP packet size

You can take a look at this document:

http://www.cisco.com/en/US/products/sw/voicesw/ps5640/products_configuration_example09186a0080982499.shtml

You should be on 12.4(20)T or later to try these features. It says this is a CUBE feature, but I've confirmed it on one of my CME boxes in the labs.

This feature allows for you to do SIP header modifications for outgoing SIP messages. This will allow you to remove headers as long as they are non-mandatory.

hth,

nick

2 REPLIES

Re: SIP packet size

You can take a look at this document:

http://www.cisco.com/en/US/products/sw/voicesw/ps5640/products_configuration_example09186a0080982499.shtml

You should be on 12.4(20)T or later to try these features. It says this is a CUBE feature, but I've confirmed it on one of my CME boxes in the labs.

This feature allows for you to do SIP header modifications for outgoing SIP messages. This will allow you to remove headers as long as they are non-mandatory.

hth,

nick

New Member

Re: SIP packet size

Thank you so much!

1102
Views
0
Helpful
2
Replies