Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

source route calls

Hi, I have to questions.

1. I have a 3845 gateway with 2 ISDN PRA(E1) trunks. Is it possible to route the out-bound calls out of a particualar PRA based on the calling number? How can I achieve this?

2. For inbound calls, if a destination is not available, an 'error message' is sent back to ISDN provider. Can I over-write this with a 'busy' signal? This is for the provider to send the call to another location.

Thanks in advance.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: source route calls

1. yes, see: http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801c0a88.shtml

2. should be possible with configuration of voice-class and causecode, but I've never personally done that.

Hope this helps, please rate post if it does!

1 REPLY
Hall of Fame Super Gold

Re: source route calls

1. yes, see: http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801c0a88.shtml

2. should be possible with configuration of voice-class and causecode, but I've never personally done that.

Hope this helps, please rate post if it does!

145
Views
0
Helpful
1
Replies
CreatePlease to create content