Setup voice pots on 2811 router last week. I configured 5 lines and was able to dial in/out. I came in today and only 3 of 5 phones are able to receive calls. I've combed thru the logs and can't any issues with the config. Except that the s0/0/0:23 up/up (spoofing) I have a external CSU and the line is not generating any errors. Any suggestions?
dial-peer voice 9 pots destination-pattern .T direct-inward-dial port 0/0/0:23 forward-digits all ! ! ! ! telephony-service em logout 0:0 0:0 0:0 max-ephones 25 max-dn 25 ip source-address 10.10.1.1 port 2000 auto assign 1 to 25 timeouts interdigit 5 url authentication http://10.10.1.2/CCMCIP/authenticate.asp load 7960-7940 P00308000500 time-zone 12 time-format 24 date-format yy-mm-dd max-conferences 4 gain -6 call-forward pattern .T moh music-on-hold.au dn-webedit transfer-system full-consult transfer-pattern .T create cnf-files version-stamp 7960 Jun 02 2010 17:36:37 ! ! ephone-dn 1 dual-line number 6017 ! ! ephone-dn 2 dual-line number 6018 ! ! ephone-dn 3 dual-line number 6019 ! ! ephone-dn 4 dual-line number 6020 ! ! ephone-dn 5 dual-line number 6021
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...