Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Syslog and FXO card

I have a 2811 with one four-port FXO card; 4 POTS lines are connected to it. Syslog is configured on the router, sending traps (debug level) to a host. For some reasons, I do not get any info in syslog form the card; so making or receiving a call sends nothing. Any ideas?

Thanks, S.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: Syslog and FXO card

This is the normal, making and receiving calls do not generate syslog output. If you want output, either enable some debug permanently, or use a radius server for exact accounting.

Hope this helps, please rate post if it does!

1 REPLY
Hall of Fame Super Gold

Re: Syslog and FXO card

This is the normal, making and receiving calls do not generate syslog output. If you want output, either enable some debug permanently, or use a radius server for exact accounting.

Hope this helps, please rate post if it does!

163
Views
0
Helpful
1
Replies
CreatePlease to create content