Could anyone please tell that if we have a VOIP setup with a Telco over multiple PRIs. Like 10 PRIs from Cisco router are connected to the far end switch. Then how to distribute the traffic evenly on all the PRIs? Which algorithms are being used by cisco for channel seizure. and how to check and configure these parameters on cisco router to distribute traffic evenly between all PRIs. One more thing that does this all scenario is cover under the traffic shaping ? if yes then kindly forward me some document related to this.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...