I have a 1 Call Manager cluster with Unity and off box Exchange with 15 remote offices running off of this. Running G729 to the Unity Cluster, and all transcoding is done at the cluster site on CMM blades. My question is at what point is transcoding even used and what is the best practice. We have ISR at all the remote sites with 2 - 4 DSPs.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...