Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

translation rule

Hi,

I have some question of translation rule config

translation-rule 10

Rule 0 866xxxxx 112866xxxxx ANY international

I know that it put the prefix 112 in front of the called number. however, why it put "ANY international"

rgds

1 REPLY
VIP Purple

Re: translation rule

The "any" and "international" keywords can be used to specify the number type. So, you could change the number type of an incoming number with any type to a type of international. Voice translation rules are now the preferred way to perform translations as opposed to translation rules. A voice translation rule to accomplish this would be:

voice translation-rule 1

rule 1 /^866/ /112866/ type any international

This rule would modify any number beginning with 866 with any number type by prefixing 112 and changing the type to international. Take a look at the following link for further explanation.

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a0080325e8e.shtml

Hope this helps. If so, please rate the post.

Brandon

157
Views
5
Helpful
1
Replies
CreatePlease to create content