If you are using a combination of '...' and * in the GK configs as local zone prefixes, , delete some of the prefixes using the wildcard dots and see if this makes a difference. I have seen some issues in the past where the GK selection mechanism has trouble getting a closest match when similar zone prefixes are used.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...