We use both the VG224 and ATA186 devices here to convert to analog dialing. It seems we have to reset the gateway and/or the ata devices regularly due to common issues such as dead air, cannot fax within, cannot receive but can send and vice versa. Whenever we reset, everything goes back to normal. Then it happens all over the next week. The IOS is up to date on the gateway and call manager manager is also up to date; vers 4.2. Has anybody else had this type of experience, if so, what have you done to address it? Thanks to all in advance :)
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
IntroductionIn this article we'll discuss how to troubleshoot packet
loss in the asr9000 and specifically understanding the NP drop counters,
what they mean and what you can do to mitigate them. This document will
be an ongoing effort to improve troublesh...