Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

vic card not initializing

I have recently got a router - 1751v

and also a voice card - vic-2fxs

The card is not getting initialized

amber light is glowing contineously

error showing card not initializing, unknown hardware found in slot1.

here is the sh tech support details of the router

the card is vic-2fxs

------------------ show version ------------------

Cisco Internetwork Operating System Software

IOS (tm) C1700 Software (C1700-SV8Y-M), Version 12.2(13)T16, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2005 by cisco Systems, Inc.

Compiled Thu 14-Apr-05 19:25 by yiyan

Image text-base: 0x80008120, data-base: 0x81190E44

ROM: System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)

ROM: C1700 Software (C1700-SV8Y-M), Version 12.2(13)T16, RELEASE SOFTWARE (fc1)

yourname uptime is 4 minutes

System returned to ROM by power-on

System image file is "flash:c1700-sv8y-mz.122-13.T16.bin"

cisco 1751 (MPC860P) processor (revision 0x400) with 83979K/14325K bytes of memory.

Processor board ID FOC08310YEZ (1669471188), with hardware revision 0000

MPC860P processor: part number 5, mask 2

Bridging software.

X.25 software, Version 3.0.0.

1 FastEthernet/IEEE 802.3 interface(s)

2 Serial(sync/async) network interface(s)

32K bytes of non-volatile configuration memory.

32768K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

------------------ show diag ------------------

Slot 0:

C1751 1FE VE DV Mainboard Port adapter, 3 ports

Port adapter is analyzed

Port adapter insertion time unknown

EEPROM contents at hardware discovery:

Hardware Revision : 4.0

PCB Serial Number : FOC08310YEZ

Part Number : 73-7241-04

Board Revision : B0

Fab Version : 04

Product Number : Unknown

EEPROM format version 4

EEPROM contents (hex):

0x00: 04 FF 40 02 4D 41 04 00 C1 8B 46 4F 43 30 38 33

0x10: 31 30 59 45 5A 82 49 1C 49 04 42 42 30 02 04 FF

0x20: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

Packet Voice DSP Module Slot 0:

Hardware Revision : 3.2

Part Number : 73-6726-01

Board Revision : A0

Deviation Number : 0-0

Fab Version : 03

PCB Serial Number : VIC09267FBE

RMA Test History : 00

RMA Number : 0-0-0-0

RMA History : 00

Processor type : 02

Number of DSP's : 1

DSP memory size(in kwords): 256

Type of DSP : TMS320C549

Product Number : PVDM-256K-4=

EEPROM format version 4

EEPROM contents (hex):

0x00: 04 FF 40 02 AC 41 03 02 82 49 1A 46 01 42 41 30

0x10: 80 00 00 00 00 02 03 C1 8B 56 49 43 30 39 32 36

0x20: 37 46 42 45 03 00 81 00 00 00 00 04 00 09 02 FF

Packet Voice DSP Module Slot 1:

Not populated

WIC/VIC Slot 0:

Serial 2T (12in1)

Hardware revision 1.0 Board revision D0

Serial number 0024047013 Part number 800-03181-01

FRU Part Number WIC-2T=

Test history 0x00 RMA number 00-00-00

Connector type PCI

EEPROM format version 1

EEPROM contents (hex):

0x20: 01 12 01 00 01 6E ED A5 50 0C 6D 01 00 00 00 00

0x30: 68 00 00 00 00 10 12 00 FF FF FF FF FF FF FF FF

can anyone pls help....

  • Voice over IP
2 REPLIES
New Member

Re: vic card not initializing

Cisco Employee

Re: vic card not initializing

are you sure it is a vic-2fxs and not a vic2-2fxs ?

If so then either a defective card or you may have a counterfeit card (they are out there ) does card have a sticker on it that shows an american flag and made in USA ? if so it is a counterfeit card. If it is a vic2-2fxs you cannot use it in a 1751.

230
Views
5
Helpful
2
Replies
This widget could not be displayed.