I've seen a few things about 7200's with NPE-100/200 incompatible with 2port t1/e1 voicecard......I've been surfing around but without any real answers...we have got the right ios etc...but haven't seen anything on field notices....
please see sh diag/sh ver for a PA-VXB-2TE1+= installed into a 7204...
running c7200-is-mz.121-14.bin, can anyone explain why the card is not active? should be hotswap?
cisco 7204 (NPE200) processor (revision B) with 57344K/8192K bytes of memory.
Processor board ID 8521927
R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache
This document is an early notification of a behaviour change that will be introduced in IOS XR release 6.5.
IOS XR configuration principles relevant for this article are:
On router platforms all interfaces must be by defaul...
With XR 4.2.0 the ASR9000 is releasing a new line of hardware models. This amongst others is the RSP440, the next generation RSP with faster switch fabric along with Typhoon based Linecards, the next generation network processor.
The Cisco EPN system incorporates a network architecture designed to consolidate multiples services on a single Multiprotocol Label Switching (MPLS) transport network. This network is designed primarily based on Application ...