voice card not appaering in configuration?

syrnrsc01 · ‎02-11-2014

we have inserted pvdm3 module in to the 2901 router

but its LED status is showing Amber continuolsly.

I would like configure the VIC3-2FXS/DID card but I am not able to see the card in running configuration but I could see the card in sh diag.

Can any ony help?

Its sh diag command giving the following output.

/#sh diag

Slot 0:

C2901 Mother board 2GE, integrated VPN and 4W Port adapter, 4 ports

Port adapter is analyzed

Port adapter insertion time 00:58:11 ago

EEPROM contents at hardware discovery:

PCB Serial Number : FOC16310CSA

Hardware Revision : 1.0

Part Number : 73-11834-09

Top Assy. Part Number : 800-30795-05

Board Revision : A0

Deviation Number : 0

Fab Version : 03

Product (FRU) Number : CISCO2901/K9

Version Identifier : V05

CLEI Code : CMMHB10ARA

Processor type : C1

Chassis Serial Number : FGL16312126

Chassis MAC Address : 6073.5c26.7440

MAC Address block size : 72

Manufacturing Test Data : 00 00 00 00 00 00 00 00

EEPROM format version 4

EEPROM contents (hex):

0x00: 04 FF C1 8B 46 4F 43 31 36 33 31 30 43 53 41 40

0x10: 06 17 41 01 00 82 49 2E 3A 09 C0 46 03 20 00 78

0x20: 4B 05 42 41 30 88 00 00 00 00 02 03 CB 8C 43 49

0x30: 53 43 4F 32 39 30 31 2F 4B 39 89 56 30 35 20 D9

0x40: 04 40 C1 CB C2 C6 8A 43 4D 4D 48 42 31 30 41 52

0x50: 41 09 C1 C2 8B 46 47 4C 31 36 33 31 32 31 32 36

0x60: C3 06 60 73 5C 26 74 40 43 00 48 C4 08 00 00 00

0x70: 00 00 00 00 00 F3 00 65 40 01 25 41 00 87 42 00

0x80: 00 F8 00 28 03 E8 1C 89 07 D0 20 21 0B B8 20 93

0x90: 0F A0 21 2F 13 88 21 83 17 70 21 A8 1B 58 21 B0

0xA0: 1F 40 21 AB 23 28 21 79 27 10 21 78 41 01 1D 42

0xB0: 00 00 F8 00 28 03 E8 1C 20 07 D0 1F 40 0B B8 20

0xC0: 6C 0F A0 21 34 13 88 21 34 17 70 21 98 1B 58 21

0xD0: 98 1F 40 21 98 23 28 21 34 27 10 21 34 FF FF FF

0xE0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0xF0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

PVDM Slot 1:

16-channel (G.711) Voice/Fax PVDM3 DSP DIMM PVDM daughter card

Hardware Revision : 1.0

Part Number : 73-11576-03

Board Revision : C0

Deviation Number : 0

Fab Version : 03

PCB Serial Number : FOC162257KD

RMA Test History : 00

RMA Number : 0-0-0-0

RMA History : 00

Processor type : 00

Product (FRU) Number : PVDM3-16

Version Identifier : V01

EEPROM format version 4

EEPROM contents (hex):

0x00: 04 FF 40 05 D8 41 01 00 82 49 2D 38 03 42 43 30

0x10: 88 00 00 00 00 02 03 C1 8B 46 4F 43 31 36 32 32

0x20: 35 37 4B 44 03 00 81 00 00 00 00 04 00 09 00 CB

0x30: 8F 50 56 44 4D 33 2D 31 36 20 20 20 20 20 20 20

0x40: 89 56 30 31 20 D9 02 40 C1 FF FF FF FF FF FF FF

0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

WIC Slot 0:

3rd generation - FXS DID Voice daughter card (2 port)

Hardware Revision : 1.0

Top Assy. Part Number : 800-30501-02

Board Revision : A0

Deviation Number : 0

Fab Version : 07

PCB Serial Number : FOC1350420M

RMA Test History : 00

RMA Number : 0-0-0-0

RMA History : 00

Product (FRU) Number : VIC3-2FXS/DID

Version Identifier : V02

CLEI Code : IP9IAB3CAB

Longitudinal Calibration : 01 10 10 4F 8D 10 10 8F

9F

EEPROM format version 4

EEPROM contents (hex):

0x00: 04 FF 40 06 21 41 01 00 C0 46 03 20 00 77 25 02

0x10: 42 41 30 88 00 00 00 00 02 07 C1 8B 46 4F 43 31

0x20: 33 35 30 34 32 30 4D 03 00 81 00 00 00 00 04 00

0x30: CB 8D 56 49 43 33 2D 32 46 58 53 2F 44 49 44 89

0x40: 56 30 32 20 D9 02 40 C1 C6 8A 49 50 39 49 41 42

0x50: 33 43 41 42 D3 09 01 10 10 4F 8D 10 10 8F 9F FF

0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

Embedded Service Engine 0/0 :

Total platform memory : 524288K bytes

Total 2nd core memory : 0K bytes

Start of physical address for 2nd core : 0x80000000

Virtual address start of 2nd core memory : 0x0 - 0x0

2nd core configured disabled

L2 cache ways for 2nd core : 0

Its sh running-conf command giving the following output.

/#sh running-config

Building configuration...

Current configuration : 1228 bytes

!

! Last configuration change at 06:29:29 UTC Fri Feb 7 2014

version 15.1

service timestamps debug datetime msec

service timestamps log datetime msec

no service password-encryption

!

hostname /

!

boot-start-marker

boot-end-marker

!

enable secret 4 tnhtc92DXBhelxjYk8LWJrPV36S2i4ntXrpb4RFmfqY

!

no aaa new-model

!

no ipv6 cef

ip source-route

ip cef

!

multilink bundle-name authenticated

!

crypto pki token default removal timeout 0

!

license udi pid CISCO2901/K9 sn FGL16312126

hw-module pvdm 0/1

!

username cisco

!

interface Embedded-Service-Engine0/0

no ip address

no ip route-cache

shutdown

!

interface GigabitEthernet0/0

ip address 172.169.2.152 255.255.255.0

duplex auto

speed auto

!

interface GigabitEthernet0/1

no ip address

duplex auto

speed auto

!

ip forward-protocol nd

!

no ip http server

no ip http secure-server

!

control-plane

!

line con 0

line aux 0

line 2

no activation-character

no exec

transport preferred none

transport input all

transport output pad telnet rlogin lapb-ta mop udptn v120 ssh

stopbits 1

line vty 0 4

password cisco

login

transport input all

line vty 5 15

password cisco

login

transport input all

!

scheduler allocate 20000 1000

end

and sh flash giving me the following output.

/#sh flash

-#- --length-- -----date/time------ path

1 74503236 Jul 30 2012 20:08:54 +00:00 c2900-universalk9-mz.SPA.151-4.M4.bin

2 2903 Jul 30 2012 20:21:54 +00:00 cpconfig-29xx.cfg

3 3000320 Jul 30 2012 20:22:10 +00:00 cpexpress.tar

4 1038 Jul 30 2012 20:22:18 +00:00 home.shtml

5 122880 Jul 30 2012 20:22:26 +00:00 home.tar

6 1697952 Jul 30 2012 20:22:40 +00:00 securedesktop-ios-3.1.1.45-k9.pkg

7 415956 Jul 30 2012 20:22:54 +00:00 sslclient-win-1.1.4.176.pkg

Leo Laohoo · ‎02-11-2014

Duplicate posts.

Go here: https://supportforums.cisco.com/thread/2266233

Kevin Monteiro · ‎02-19-2014

Attach show version.

Regards,
Kevin

Sent from Cisco Technical Support Android App