Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VOICEGATEWAY - ISSUE

pstn pri is connected on my 3845 router (VWIC-2MFT-T1). E1 is up and ISDN layer 2 is also up. When I am dialing the calls I am getting some error.

Expecting some ones help to resolve the issue.

DEBUG ISDN Q931 OUT PUT

============================

VoiceGW#

Oct 20 12:03:57.484 INDIA: ISDN Se0/1/0:23 Q931: RX <- SERVICE pd = 3 callref =

0x00

Change Status i = 0xC0 - in-service

Channel ID i = 0xAC

Oct 20 12:04:02.484 INDIA: ISDN Se0/1/0:23 Q931: RX <- SERVICE pd = 3 callref =

0x00

Change Status i = 0xC0 - in-service

Channel ID i = 0xAC

Oct 20 12:04:07.481 INDIA: ISDN Se0/1/0:23 Q931: RX <- SERVICE pd = 3 callref =

0x00

Change Status i = 0xC0 - in-service

Channel ID i = 0xAC

Oct 20 12:04:12.481 INDIA: ISDN Se0/1/0:23 Q931: RX <- SERVICE pd = 3 callref =

0x00

Change Status i = 0xC0 - in-service

Channel ID i = 0xAC

Oct 20 12:04:17.057 INDIA: ISDN Se0/1/0:23 Q931: pak_private_number: Invalid typ

e/plan 0x0 0x0 may be overriden; sw-type 3

Oct 20 12:04:17.057 INDIA: ISDN Se0/1/0:23 Q931: pak_private_number: Invalid typ

e/plan 0x0 0x0 may be overriden; sw-type 3

Oct 20 12:04:17.057 INDIA: ISDN Se0/1/0:23 Q931: Applying typeplan for sw-type 0

x3 is 0x2 0x1, Called num 017325908100

Oct 20 12:04:17.057 INDIA: ISDN Se0/1/0:23 Q931: TX -> SETUP pd = 8 callref = 0

x0186

Bearer Capability i = 0x8090A2

Standard = CCITT

Transer Capability = Speech

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0xA98397

Exclusive, Channel 23

Calling Party Number i = 0x2183, '6821'

Plan:ISDN, Type:National

Called Party Number i = 0xA1, 'NUMBERDELETED'

Plan:ISDN, Type:National

Oct 20 12:04:17.485 INDIA: ISDN Se0/1/0:23 Q931: RX <- SERVICE pd = 3 callref =

0x00

Change Status i = 0xC0 - in-service

Channel ID i = 0xAC

Oct 20 12:04:21.057 INDIA: ISDN Se0/1/0:23 Q931: TX -> SETUP pd = 8 callref = 0

x0186

6 REPLIES
New Member

Re: VOICEGATEWAY - ISSUE

All,

I have resolved this issue and now i am in the next level issue.

Now I can call any number from my end phone but I am not getting ringback tone. If the called party picked up the call, not able to hear calling and called party speaches. Both the way the voice is not working. Is there any specific commands to resolve this issue.

New Member

Re: VOICEGATEWAY - ISSUE

Guys,

The issue got resolved.Thanks to everyone.

New Member

Re: VOICEGATEWAY - ISSUE

Hi,

I have the same issue as your last post. Can you tell me how did you resolved

THX

New Member

Re: VOICEGATEWAY - ISSUE

Hi. Gopi. How did u solve the problem. when ever solve the problem on your own, pls post it so that others will benefit.

regards

Gem

New Member

Re: VOICEGATEWAY - ISSUE

Not that i need this, but i think Gopi should respond to those who needs answers from him.

New Member

Re: VOICEGATEWAY - ISSUE

All,

Sorry for dely response.

When I commisioned the pri I have started with trunk group configuration and it was not working. Then I changed my config to nfas and it started working.

537
Views
0
Helpful
6
Replies