Gents....
I have an FXO card (voice port 0/3/0 and 0/3/1) with two extensions from a PBX system (please see diagram below). I have three VoIP phones (Cisco type 7965 and 7945) that can call each other (etxn 3001, 3002, etc)
How do I program the following:
- PBX extn 2001 to ring on phone 3001 (and same with pbx extn 2002 for phone 2002)?
- Make the phone call out to the pbx using prefix "89" for and outside line?
Thanks.
