In the present time I'm preparing to give a presentation on the different between Voip over legacy PBX (Nortel Opt-11) and AVVID CCM VOIP topology. I'd worked alot on VoIP and Vofr via legacy PBX and a fair knowledge on AVVID. I need your expert advise or point me to some documentation to research.
i m working at a site where the voice backbone is on frame relay i.e. Vofr. and the pbx is nortel. Now we are integrating a voip setup in that network. The voip box is of audiocodes MP-104 and has an ethernet port through which it will go to router 3661. from router it will go to the PBX and the VOfr network. my question is whether the router can simultaneously handle vofr and voip networks and will the vofr packet coming at one port will be able to go to voip port and vice-versa.
1. Introduction Internet security is important with the increasing
attacks that are happening every day. Many internet and browsing
security solutions exist, but some are not very easy to use or maybe the
question is how can I enable them? In this referen...
Cisco Software Manager Server API Guide This document describes the
programmatic interfaces, RESTful APIs, which are supported by Cisco
Software Manager Server (CSM Server). Overview CSM Server supports a set
of finite RESTful APIs. The first step to use ...
If you are using Cisco's new linux-based Cisco Software Manager server,
then you probably want to make sure there is a startup service for
it.I'll assume that you've already installed the CSM server on a
systemd-based linux system. The commands given belo...