VoIP legacy versus AVVID VOIP

[a-leuluai]

Ben,

In the present time I'm preparing to give a presentation on the different between Voip over legacy PBX (Nortel Opt-11) and AVVID CCM VOIP topology. I'd worked alot on VoIP and Vofr via legacy PBX and a fair knowledge on AVVID. I need your expert advise or point me to some documentation to research.

Thanks,

Allen L.

Network Engineer III

[#2]

Here are some documentation you have asked for:

http://www.cisco.com/en/US/products/sw/custcosw/ps1001/products_white_paper09186a0080145588.shtml

http://www.cisco.com/en/US/about/ac123/ac114/ac173/ac222/about_cisco_packet_small_and_midsized_business09186a0080158b0f.html

[a-leuluai]

Thank you for the link that really help. Much appreciation.

Thanks,

Allen

[ashish_gupta]

hi

i m working at a site where the voice backbone is on frame relay i.e. Vofr. and the pbx is nortel. Now we are integrating a voip setup in that network. The voip box is of audiocodes MP-104 and has an ethernet port through which it will go to router 3661. from router it will go to the PBX and the VOfr network. my question is whether the router can simultaneously handle vofr and voip networks and will the vofr packet coming at one port will be able to go to voip port and vice-versa.

thanks for any help