Not right now. At this time the 6509 uses either a 6608 T1 blade or 6624 analog blade to talk to the CCM. It uses the Skinny protocol to communicate with the Cisco CallManager server to set up and tear down calls. It can not work independently like a gateway.
Introduction: The "external-out enable" command is available for
configuration under the "router ospf process" in case of the IOS-XR
operating system. This command basically enables advertisement of
intra-area routes on the device as external routes in th...
Introduction Basic configuration for netflow Scale parameters for
netflow Netflow support Architecture Packet flow for netflow Inside the
LC CPU Netflow Cache size, maintenance and memory Sample usage Cache
Size Aging Permanent cache Characteristics Which...