Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VoIP required Bandwidth

Please I use a DSL, Fractional T1 or a Full T1 to run my Voip service with 24 ports, codec is g729. The connection type that will give better connection. Also include the bandwidth.

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions

Re: VoIP required Bandwidth

Hi,

you might have a look at "Voice Over IP - Per Call Bandwidth Consumption"

http://www.cisco.com/en/US/tech/tk652/tk698/technologies_tech_note09186a0080094ae2.shtml

which gives formulas for most possible cases.

Did this help? Then rate it please

Martin

1 REPLY

Re: VoIP required Bandwidth

Hi,

you might have a look at "Voice Over IP - Per Call Bandwidth Consumption"

http://www.cisco.com/en/US/tech/tk652/tk698/technologies_tech_note09186a0080094ae2.shtml

which gives formulas for most possible cases.

Did this help? Then rate it please

Martin

496
Views
0
Helpful
1
Replies