This works just fine if the user enters 11 digits (i.e. US long distance call) but just hangs with 7 digits (a local call) waiting for the other 4 digits. Is there a way to make the grammar a variable length so the person can call single digit ("0"), or 3 digit ("411"), or 7 or 10 digit local calls, or 11 digit long distance calls? I would settle for calls between 7 and 11 digits.
IntroductionPre-requisite: Caveat :When IPXE Boot could be done : IPXE Boot :Ipxe boot using DHCP Server :
iPXE boot in ASR9K
Migration recommendation document for Cxr to Exr.
This document applies to NCS5500 and ASR9000 routers and has been verified as such.
traditional ECMP or equal cost multipath loadbalances traffic over a number of available paths towards a destination. When one path fails, the traffic gets r...
Hi community,I just wanted to share my findings about accesing to ACL counters by SNMP on ASR9000/XR.
Searching on Internet I found the section ACL Counters Using SNMP in the IP Addresses and Services Configuration Guide but I didn't found any inf...