Re: what show command should be run to know if someone is callin
Show call active voice will show called number. It provides a lot of output though. If you know the calling number then you are golden then you can run the command then either grep on that or search the output. If you don't know either, then you can use the brief and compact options of the command to find a match on IP endpoint or PSTN port. With this you can find the call leg ID and runn the command on the call leg id. This will then tell you the calling and called number.
Here is the doc on it. It doesn't show the numbering in this document but it's in the real command.
This document is an early notification of a behaviour change that will be introduced in IOS XR release 6.5.
IOS XR configuration principles relevant for this article are:
On router platforms all interfaces must be by defaul...
With XR 4.2.0 the ASR9000 is releasing a new line of hardware models. This amongst others is the RSP440, the next generation RSP with faster switch fabric along with Typhoon based Linecards, the next generation network processor.
The Cisco EPN system incorporates a network architecture designed to consolidate multiples services on a single Multiprotocol Label Switching (MPLS) transport network. This network is designed primarily based on Application ...