Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Xcode ressources behind a firewall, what ports must be permit

Hi all,

I install a gateway 2821 to have a XCODE ressources, the gateway will be behind a firewall, anybody know please what ports must be permit in the firewall ? is the IP Phones witch will use the transcoder sessions communicate with the gateway directly with rtp for example or just with the callmanager ?

Momo

1 REPLY

Re: Xcode ressources behind a firewall, what ports must be permi

Hi Momo,

You will need these ports:

TCP 2000 for SCCP

RTP 16384-32767 for audio

UDP 69 for TFTP

RTP stream is going to flow from the IP phone to the transcoder and back, and from the gateway to the transcoder and back.

hth,

nick

136
Views
0
Helpful
1
Replies