Voice Systems and Accessories - Small Business

My Cisco IP phone defaults to factory set time at each provisioning reset requiring me to manually reset time to current.  How do I change settings to avoid this?  I can't find a configuration setting for this.edit:  actually, it appears that the tim...

I am trying to program a spa 303 for call park soft key.  The way our system works is you would press transfer enter in *103 and then transfer again to complete the transfer and park the call.  I have not been able to get a softkey to perform this fu...

Hi,Can anybody tell me if this model has a calling group featured supported, please?. I need to talk to more than two people at a conference room alike.Best,

HiJust purchased,setup a new spa112 . Unit is working ,however I'm at odds to figure out where/how to get the phone to stop flashing it has a vmail but iit does'nt have any. I can call my number and it leaves a vmail, I can delete it after but the me...

HiThe  user is claiming the transfer is not working - sometimes. The backend is asterisk, and the logs are simply showing hangup.I believe I have an 'Organic Interface Issue'What I want to know is if I can setup debug/syslog to track the keys that ar...

I have a conundrum.  I have a main extension that is set to the Auto Attendant but I would like to have the Office Admin to be able to trap the call if he can before the call transfers to the Auto Attendant.The Auto Attendant is on a hunt group 1 and...

Has anybody ever configured a SPA112 to a Draytek 2820IPPX.I want to use a SPA112 to activate a DTMF door entry system through a Draytek 2820IPPX telephone system using a SIP / EXT on the phone systemSo any tips or if you have a copy of a configurati...

Hi There Hope you can help. I have the above system for our small business. We are in the building industry and we find a lot of clients hang up before leaving a message as they want a response there and then. Often I just miss the call or it diverts...

My call display suddenly stopped working, just showing "Incoming call".I'm trying to upgrade the firmware current 1.0.2 (006) to see if it resolve the issue.I downloaded the latest firm ware no problem.I logged into the "Phone Adapter Configuration U...

We have a UC540 with the FXS analog inputs configured as user phones.  We call a call blast group setup for pilot # 8000.When the door stations go off hook the line rings but does not hit the 8000 blast group.Where is do you program the number to dia...

My customer was shipped a BE6000S as part of the Demo Loan Program.There is no configuration on the 2900 router, should there be?Thanks,ww3

I have a SPA122 and I've read from a user on another forum that he set up a dial plan such that it will use a different provider depending on the number used.I have two VoIP services, one for local calls and another for international calls (voip.ms) ...

Hello,i have a problem, im getting Request failed on my SPA508G / FW 7.5.4 / test.xml<?xml version="1.0" encoding="UTF-8"?><CiscoIPPhoneDirectory><Title>Book</Title><Prompt>Test Book</Prompt><DirectoryEntry><Name>Test</Name><Telephone>9999</Telephone...