Please take a look at the attached jpg. All of my 79xx phones have these quotes at the end of alot of the menus. Have tried creating the cnf files and resetting the cnf files in CCA but it keeps coming up. Any ideas?
I have two independent cases of SPA525G1 and G2 being used as teleworker phones spontaneously rebooting during calls. They are running the latest software (7.4.8). It doesn't happen at any other time, only during phone calls. The SPA525G1 is my of...
Hi, I have an Asterisk server that I am able to use to auto-provision several spa525g's with, but having trouble provisioning the new spa504g's that we just got in. I created the spa504g.xml according to the instructions, as well as the $MA.xml's,bu...
I have a build for a UC560-T1E1-K9.I know it comes with 4 FXS ports, however my customer has more analogue devices than 4.I know that I can add VIC FXS modules, but can I use a SPA8800?What about a VG202, or VG204, VG224?I believe that you cannot use...
Can I use the following modules in a UC560-BRI-K9:1 x VIC2-4FXO1 x VWIC2-1MFT-T1/E1Or will their be DSP issues since I will be using it as an E1 and all 30 channels?Thanks in advance,Steven
Hi,After configuring a Basic ACD using CCA for a UC560, we noticed that the Welcome Prompt was never played when calling the pilot Number, but just the "transfer toBasic ACD Prompt" file was played. I started reading and found the followng informatio...
Re-posting in this forum as suggested:I've searched the web along with this forum and cannot seem to find an answer/solution to an issue I'm having with an SPA-2102 (not behind NAT) and T38 faxing (or lack thereof).SPA-2102 Info:Software Version: 5....
Can someone please help me, trying to transfer a call from my analogue dect handset, i thought pressing the R button would give me a nother line but does nothing.Thanks
Hi,Unable to locate the right location to post for this, so going to assume the UC-500 section is the appropriate place at this time.A few issues are being discovered when using CSCC, often if changes are being made and I log out of it and then try t...
When configuring the autoattendant, I would like to see an option for dial 0 for operator which transfers the call to a specific extension.I was able to work around this thru the configuration, but it was not clean.
What settings are there by default in the 320's firewall? What is the behaviour, so to speak, of this firewall. Are there any documents that talk about this?
We recently deployed a UC320 system in a Dentist office. 1 Phone (SPA504G) is in a treatment room where they use sedation and the patient is semi-conscious. We need a dedicated button on the SPA504G for dialing 911. When I attempt to program one of...
I just started to experience some timeout session errors when trying to access the URL services from my 7925s. I am also experiecing the error when I attempt to access the help menu.Any ideas?
I am trying to pair a UC320 with a catalyst 2950 switch and need some advice on QoS. I would like to use auto qos on the swich but I am wondering if it will play nice with the QoS the 320 is using. I noticed that the bandwidth on the 320 wan link is...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: